Sportsmith Blog

Indoor Cycle Felt Brake Pad Restoration

About This Video

Tools Needed: Clean, hard bristle wire brush, 4mm Allen wrench, and Silicone spray lube.

Replacing the brake pads on your Schwinn Indoor Cycle due to a loud squealing is not the only solution. You can bring that old pad back to life as long as it has a good thick felt that doesn’t crumble off during the restoration process.

If the pads must be replaced, the following process will also prolong the life of the new pads.

Remove and inspect the pads. If the pads still have plenty of felt, the squealing is probably due to hardening or glazing of the felt pads.

End that annoying squeal by roughing up the felt pad with a clean, hard bristle wire brush. Once the felt has been roughed up, trim any excess felt from around the edges and saturate the felt with silicone spray.

Re-install the pads and you are back in business!



Comments (0) Trackbacks (0)

No comments yet.

Leave a comment

This blog is kept spam free by WP-SpamFree.

No trackbacks yet.