Sportsmith Blog

How to Replace the Magnet-Standoff on a Life Fitness 95Xi CrossTrainer

About This Video

Replacing the Magnet and Standoff Assembly on a LifeFitness 95Xi Crosstrainer

  • This video demonstrates how to replace the magnet and standoff assembly on your 95Xi Crosstrainer by LifeFitness

Tools necessary:

  • Philips Screwdriver
  • T25 Driver
  • T50 Driver
  • 2MM Allen Wrench
  • 5/32” Allen Wrench
  1. Remove the main shrouds as seen in Sportsmith’s main shroud removal video
  2. Remove the outer link cover as seen in the Outer Link Cover removal video
  3. Remove the Left Pedal Lever Assembly as seen in Sportsmith’s pedal lever replacement video
  4. Remove the two bolts holding the crank arm cover in place, and remove the crank arm cover
  5. Remove the screw securing the magnet and standoff assembly to the drive pulley and remove the assembly from the unit
  6. Install the new magnet and standoff assembly in reverse order

This concludes today’s repair demonstration.



Comments (0) Trackbacks (0)

No comments yet.

Leave a comment

This blog is kept spam free by WP-SpamFree.

No trackbacks yet.