Sportsmith Blog

How to Replace the Drive Belt for a LifeFitness 95T Treadmill

Tools that you will need:

  • Phillips screwdriver
  • 8mm Allen wrench
  • 9/16 socket or hand wrench
  • Long flathead screwdriver

Unplug the treadmill and make sure the power is OFF. Remove the upright tube caps. Remove the front shroud. Remove the finger guards. Loosen the bolts on the rear roller by 10 full turns each. Pry up the tension arm and remove the belt from the pulley. Remove the front roller. Reinstall new belt and reassemble everything according to the steps in the video.