Sportsmith Blog
7Apr/150

How to Replace the 95Xi Crosstrainer Rocker Arm

  • Tools used:
  • Snap Ring Pliers with Tip Kit
  • 5/32” Allen Wrench
  • Phillips Screwdriver
  • T25 Torx Driver
  • T45 Torx Driver

 

  • Remove the outer dead shaft covers, the handlebar and the outer lever joint and rocker covers as seen in the appropriate Sportsmith videos
  • Using the snap ring pliers and proper tips, remove the retaining ring securing the rocker arm to the dead shaft

 

  • Remove the washer after the snap ring

 

  • Remove the torx screws securing the pedal rocker shaft to the pedal lever
  • Then slide the pedal rocker shaft out of both the pedal lever and rocker arm
  • Carefully slide the rocker arm off of the dead shaft
  • In reverse order, install the new rocker arm

Addtional Resources:

Life Fitness 95 xi Cross Trainer Parts

Comments

comments

Comments (0) Trackbacks (0)

No comments yet.


Leave a comment


This blog is kept spam free by WP-SpamFree.

No trackbacks yet.